This butterfly vent is typically used on horse, stock, dog and various other types of trailers. It is a full 7 1/2 inch in diameter with four mounting holes around the edge. The polished aluminum is attractive as well as being a useful source of ventilation. view full answer...
The material that is on the ramps of your 2007 Sundowner horse trailer is a type of artificial carpet that is typically pretty easy to install and inexpensive to replace if you stick with the carpet. Usually that type of carpet will be glued and nailed or stapled to the ramp, but if you do not see any screws, staples or nails, it may just be glued.
The problem with the artificial carpet is that the longevity is usually not as great as rubber mats or pads. Dirt, mud, grime and other elements... view full answer...
The material in the Adco SFS AquaShed Cover for Bumper Pull Horse Trailer - 14' Long # 290-46003 is waterproof. The top layer will bead water on contact and the sides are polypropylene. Any moisture that finds its way into this cover via humidity for example will not be trapped because this cover's material is breathable to eliminate mold and mildew. It comes with a storage bag and a 2 year manufacturer's warranty. view full answer...
The Taskmaster # TTWPRG235R16 and Westlake # LHWL410 will both do fine with Florida heat. We do not have the Towmaster SS or the Power King load range F tires, but I have not heard of either one to give you their reliability in comparison. Sorry I can be of assistance on that. The difference between the load range G tires listed and the load range F tires you mentioned are the ply rating and weight capacity. The G tires are rated at 14 ply and the F tires are rated at 12 ply.
We do... view full answer...
I have yet to hear of any problems with a Classic Accessories cover such as # 052963733631 causing any abrasions, marring, or damage in general to a trailer. This particular cover has air vents to reduce the amount of wind that can get trapped under the cover so the movement is somewhat restricted in that regard. The polypropylene construction will be gentle on your trailer body as well.
The only part of a cover that might cause abrasions would be the zippers. But they don't really have... view full answer...
The Stainless Steel CE Smith U-Bolts you mentioned, part # CE15503A are made from high quality 304 stainless steel to prevent corrosion. They are designed for mounting accessories and brackets to trailer frames. view full answer...
Yes, we do have the Curt Trailer Hitch Receiver # C46DR which is made in the USA for your 2022 Nissan Pathfinder. Do note that while the receiver is made in the USA some of the mounting hardware may be imported.
The T-One Vehicle Wiring Harness # TK58VR will provide you with a 4-way flat connector. This connector is needed for the lights on most small trailers you might tow as well as with Auxiliary Lights # C53201 with any hitch mounted accessory that impairs the view of your vehicle... view full answer...
Both our Curt Trailer Hitch Receivers # C99FR & # C45CR for your 2023 Toyota Highlander are made in the USA. The # C45CR has an exposed cross tube and the strength to allow for use with a weight distribution hitch. The # C99FR has a hidden cross tube and the design prevents the use of a weight distribution hitch but is a better looking receiver if you only need to use for carrying hitch mounted accessories or towing small utility trailers. Typically a weight distribution hitch is only going... view full answer...
The Roadmaster Quiet Hitch for 2" Trailer Hitches # RM-061 is made of steel and has a zinc plating for corrosion resistance. It is designed to work with ball mounts, tow bars, and hitch mounted accessories as an anti-rattle device.
The Malone Anti-Rattle HitchLock System MPG908 worked in a similar way but has been discontinued. The Roadmaster seems to be the customer favorite of all the brands. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75607 has the smaller holes between the receiver tube end and the hitch pin hole. The smaller hole is no longer used. This is a locking hitch pin and anti-rattle device that Draw-Tite has the integrated holes to utilize. I've attached a couple of videos to assist.
It is a really nice option for ball mounts and other accessories that do not have an integrated locking/anti-rattle system to stabilize and reduce noise. view full answer...
Class I and II 1-1/4 in hitch accessories are almost exclusively solid-shanked across the board. That would include ball mounts like # C45024. Just to be sure, I did contact Curt and they verified that ball mount # C45024 does have a solid shank.
For Class I and II trailer hitches you need to use the ball mount specified by the trailer hitch manufacturer in order to not void the warranty. Or you can ask the hitch manufacturer if this ball mount is acceptable and will not void the warranty.... view full answer...
The Adco All Climate Olefin RV Cover # AD97ZR, is Adco's top of the line storage cover. The top is constructed of Olefin making it one of the strongest top panels you will find on a cover. Along with the triple polypropylene sides water will bead on contact with the cover.
I recommend the Adco cover over the Classic Accessories Polypro Pro III, like # 052963731637, because of the Tyvek top. The Adco top is stronger and than the top on the Polypro Pro.
If you were looking at the review... view full answer...
Go To Results